 |
AJ10012A CORK BORING MACHINE
|
For drilling uniform and straight holes in cork or rubber stoppers. Cast-iron frame with wood platform 10 cm diameter to support work and adjustable guide rod, central hole through wheel spindle for ejector rod and introduction of lubricant(water or methylated spirit). Complete with set of 12 nickel-plated borers cutting sizes from 7 to 25 mm.
| 
|
| |
|
AJ10012B CORK BORER SHARPNER
|
Plated metal cone with hinged cutter blade set in slot, with wooden handle.
| 
|
| |
|
AJ10012C CORK PRESSURE
|
Cast iron, for softening corks evenly, by rolling, without increasing the porosity. To accommodate corks upto 32 mm diameter. On wooden base.
| 
|
| |
|
AJ10012D CORK WOODEN
|
For drilling uniform and straight holes in cork or rubber stoppers. Cast-iron frame with wood platform 10 cm diameter to support work and adjustable guide rod, central hole through wheel spindle for ejector rod and introduction of lubricant(water or methylated spirit). Complete with set of 12 nickel-plated borers cutting sizes from 7 to 25 mm.
| 
|
| |
|
AJ10012E CORK RUBBER
|
Solid superior quality rubber resistance to acid, alkali and ammonia, suitble for schools, colleges and universities. AVAILABLE IN DIFFERENT SIZES,RANGING FROM BOTTOM DIA 9MM-51 MM,ALSO AVAILABLE IN SINGLE AND DOUBLE HOLES.
| 
|
| |
|
AJ10012F CORK SILICON
|
Translucent, highly elastic, odourless, suitable for use over a temperature range -50 to 250 Deg.C, can be sterilized by steam or by hot air. AVAILABLE IN DIFFERENT SIZES,RANGING FROM BOTTOM DIA 9MM-31 MM,ALSO AVAILABLE IN SINGLE AND DOUBLE HOLES.
| 
|
| |
|
|
|
